Home/Materials/Flex cladding
Stone that
bends.
Flex cladding is a thin, light sheet with the look and texture of stone, brick, wood or weathered steel. K.J. Interior supplies and fits it in Bhavnagar, including round pillars and arches where a slab won't go.
- 2–4 mm thin
- ≈5.2 kg/m² at 4 mm
- Inside & outside
Try it
Round the
column.
- 01
Flexes
A sheet only 2–4 mm thin, and light.
- 02
Wraps
It follows round pillars, arches and curved walls.
- 03
Stays
Bonded to the surface, it moves with it instead of cracking off.
Finish — Slate & sandstone
Flat sheet
The look of masonry without its weight. A 4 mm sheet weighs around 5.2 kg a square metre, cuts to shape on site, and goes onto almost any surface.
Why it works
- Water absorption under 1%
- Weather, UV and abrasion resistant
- High impact resistance
- Frost resistant to 200 cycles
- Flexes with the wall instead of cracking away from it
Where it goes
Curves and
facades.
- 01
Round pillars
One sheet wraps the whole column, with no cut stone pieces.
- 02
Arches & curved walls
Follows a curve that rigid cladding can't.
- 03
Feature walls
Living rooms, reception backs, entryways.
- 04
Exterior elevations
Facades for homes and taller buildings.
- 05
Lobbies
Stone, brick or wood looks without the load on the wall.
- 06
Offices & shops
Quick to fit with less mess than masonry.
How we work
Sample to
surface.
- 01
Measure
We visit and check the surface it's going onto.
- 02
Choose
Pick the finish from samples, in your own light.
- 03
Cut
Sheets are cut to the shape of the wall, pillar or arch.
- 04
Fit
Bonded in place and the joints finished.
Questions
Good to know.
Can it go outside?
Yes. It's made for interior and exterior walls, including facades, and resists weather, UV and frost.
Will it really go round a pillar?
Yes, that's what it's for. The sheet bends to follow round pillars, arches and other curved surfaces.
What can it be fixed to?
Almost any sound surface. We check the wall on our visit and tell you if it needs preparing first.
How do I clean it?
Wash it gently to remove dust and dirt. Avoid harsh scrubbing and chemicals, which can affect the finish.